Characters of wheel alignment universal turntable:
● Built-in full floating ball bearing plate to ensure smooth movement of the wheels in all directions.
● Suitable for all wheel alignment machines and lifts, such as CCD, 3D wheel alignment machines, etc.
● With goniometer and hands, the large dial can be easily read from any angle and can be adjusted to the zero starting position at any time, allowing a maximum left and right 50 degree measurement (and a 360 degree rotation after take-off with the locking pin)
● Designed to be used as a portable floor unit or stand, rack or pit.
● Used to easily turn tires during four-wheel alignment tests, these dials can accurately indicate the steering angle of each wheel, allowing the bottom of the wheel to turn freely when making alignment adjustments.
● No need for a jack, as the turntable is designed to be non-slip to minimize slippage.
All the products we produce:
Use Instructions:
● Place the turntable on your workplace such as a flat floor, stand, shelf or pit.
● Remember to lock the turntable with the locking pin.
● Place the bridge next to the disc at the top of the turntable.
● Drive the car onto the turntable, making sure the tires are centered on the top plate of the turntable.
● Remove the locking pin
● Then you can turn the steering wheel to the position you want
● Put the thrust blocks under the tires
● You can perform a four-wheel alignment test
Products on production line：
Specification of wheel alignment clamp
Application | All wheel alignment machine and lift | Turntable size | L400*W400*H50MM |
Top base plate diameter | 345mm | Rotation degree | ±50° |
Raw material | Alu, steel, plastic | Color | Grey, red,etc |
Load capacity | 4-6 ton | Unilateral sliding distance | 65mm |
N.W | 36KGS/CTN | G.W | 38KGS/CTN |
Package | 2PCS/CTN | One set incl. | 2pcs turntables+2pcs passing bridges+2pcs thrust blocks |
FAQ:
Q1: Can the plates spin 360 degrees？
Yes, after loose the locking pin, it can turn 360 degree.
Q2: Is there a suddenly stop in the plates?
No, it turns smoothly.
Q3: What is the load capacity for the turntable？
4-6 tons load capacity.
Q4: Do they have bearings inside?
Yes, full-floating ball bearing plate made by polyurethane and steel.
Or if you want, we can provide steel bearing with full-floating ball bearing plate.
Q5: Did the rubber parts(passing bridges and thrust block) include to the turntables?
Yes, if buy turntable, you can get 2PCS free passing bridges and 2PCS thrust blocks inside.
Characters of wheel alignment universal turntable:
● Built-in full floating ball bearing plate to ensure smooth movement of the wheels in all directions.
● Suitable for all wheel alignment machines and lifts, such as CCD, 3D wheel alignment machines, etc.
● With goniometer and hands, the large dial can be easily read from any angle and can be adjusted to the zero starting position at any time, allowing a maximum left and right 50 degree measurement (and a 360 degree rotation after take-off with the locking pin)
● Designed to be used as a portable floor unit or stand, rack or pit.
● Used to easily turn tires during four-wheel alignment tests, these dials can accurately indicate the steering angle of each wheel, allowing the bottom of the wheel to turn freely when making alignment adjustments.
● No need for a jack, as the turntable is designed to be non-slip to minimize slippage.
All the products we produce:
Use Instructions:
● Place the turntable on your workplace such as a flat floor, stand, shelf or pit.
● Remember to lock the turntable with the locking pin.
● Place the bridge next to the disc at the top of the turntable.
● Drive the car onto the turntable, making sure the tires are centered on the top plate of the turntable.
● Remove the locking pin
● Then you can turn the steering wheel to the position you want
● Put the thrust blocks under the tires
● You can perform a four-wheel alignment test
Products on production line：
Specification of wheel alignment clamp
Application | All wheel alignment machine and lift | Turntable size | L400*W400*H50MM |
Top base plate diameter | 345mm | Rotation degree | ±50° |
Raw material | Alu, steel, plastic | Color | Grey, red,etc |
Load capacity | 4-6 ton | Unilateral sliding distance | 65mm |
N.W | 36KGS/CTN | G.W | 38KGS/CTN |
Package | 2PCS/CTN | One set incl. | 2pcs turntables+2pcs passing bridges+2pcs thrust blocks |
FAQ:
Q1: Can the plates spin 360 degrees？
Yes, after loose the locking pin, it can turn 360 degree.
Q2: Is there a suddenly stop in the plates?
No, it turns smoothly.
Q3: What is the load capacity for the turntable？
4-6 tons load capacity.
Q4: Do they have bearings inside?
Yes, full-floating ball bearing plate made by polyurethane and steel.
Or if you want, we can provide steel bearing with full-floating ball bearing plate.
Q5: Did the rubber parts(passing bridges and thrust block) include to the turntables?
Yes, if buy turntable, you can get 2PCS free passing bridges and 2PCS thrust blocks inside.
